Noozle Band Heaters are produced by brass tube, 60/15 and 80/20 nickel-chrome wires are used as heating wires and micanite plates are used for insulation. Heat resistance steel wire braided cables are used for cable outlet. Cable connection to resistance heater is protected by another brass tube. Melted material entrance is prevented, and this feature extends the service life of the heater. Standard cable length is 35 cm. Standard dimensions are usually in stock and special orders can be produced as desired dimensions and features (cable length, voltage, wattage etc.).
Technical Specs. | Nominal | Max. | Min. |
Diameter (D) | 100 mm | 25 mm | |
Length (L) | 200 mm | 20 mm | |
Thickness (R2-R1) | 4 mm | 4,20 mm | 3,70 mm |
Working Voltage | 220 | 400 | 24 |
Power (W) | 4.5w/cm2 | 5w/cm2 | 3.5w/cm2 |
Technical Table | |||
Metal Parts | Brass tube or Stainless Sheet | ||
Heating Wire Insulation | 1200°C micanite plate | ||
Heating Wire | 60/15 - 80/20 nickel chrome wire / 1200°C | ||
Heat Insulation | - | ||
Power Connection Terminal |
Steel wire braided heat resist. cable outlet |
Ø | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 70 |
25 | 70 | 90 | 100 | 125 | ||||||
30 | 80 | 110 | 125 | 150 | 170 | |||||
35 | 90 | 125 | 150 | 175 | 200 | 225 | ||||
40 | 110 | 150 | 170 | 200 | 230 | 250 | 290 | 310 | 340 | |
45 | 125 | 170 | 200 | 220 | 260 | 290 | 320 | 350 | 380 | |
50 | 140 | 180 | 220 | 240 | 290 | 320 | 360 | 380 | 420 | 480 |
55 | 160 | 200 | 240 | 260 | 320 | 350 | 390 | 420 | 450 | 500 |
60 | 180 | 220 | 260 | 280 | 320 | 380 | 420 | 450 | 500 | 550 |
65 | 190 | 230 | 275 | 320 | 380 | 420 | 450 | 490 | 550 | 600 |
70 | 200 | 250 | 300 | 360 | 400 | 450 | 490 | 530 | 580 | 680 |
75 | 220 | 270 | 330 | 400 | 420 | 450 | 520 | 570 | 630 | 740 |
80 | 230 | 290 | 350 | 430 | 450 | 500 | 560 | 620 | 670 | 780 |
85 | 240 | 310 | 380 | 450 | 480 | 540 | 600 | 650 | 700 | 820 |
90 | 260 | 330 | 400 | 480 | 500 | 560 | 630 | 700 | 740 | 860 |